Anhui Pandeng Group

Products

Products Conveying Machinery

High-efficiency Bucket Elevator

On the basis of retaining all original advantages and advanced performance of TD and TH bucket elevators, we have introduced, developed and manufactured a new generation of high-efficiency bucket elevators, Models GTD and GTH. They are divided into two types: belt type and circular chain type. Compared with ordinary elevators, they are characterized by large lifting height, high operating speed, large conveying capacity and low energy consumption. In recent years, they have been widely used in building materials, chemical, mining, grain and other industries for vertical lifting of various lump and powdery materials. Model GTD adopts steel wire rope belt as traction component, while Model GTH uses special high-strength circular chains as traction component. Both models can be equipped with level indicators, belt deviation alarms and speed monitors.

Main Features

Technical Parameters of GTD Type (Belt) High-efficiency Bucket Elevator
Specification (Bucket Width, mm)	160	200	250	315	400	500	630	800	1000	1250	1400	1600
Conveying Capacity Q (m3/h)	34	43	63	106	158	220	340	500	788	1102	1234	1543
Bucket Volume V (L)	2.6	4	6.3	10	16	25	39	65	102	158	177	252
Bucket Spacing t (mm)	260	300	325	360	410	460	520	580	650	720	720	820
Operating Speed (m/s)	1.2	1.2	1.34	1.34	1.5	1.5	1.68	1.65	1.86	1.86	1.86	1.836
Max. Lifting Height H (m)	80	80	80	80	80	80	80	80	80	80	80	80
Technical Parameters of GTH Type (Circular Chain) High-efficiency Bucket Elevator
Specification (Bucket Width, mm)	160	200	250	315	400	500	630	800	1000	1250	1400	1600
Conveying Capacity Q (m3/h)	35	37	47	74	119	166	255	363	535	767	861	1134
Bucket Volume V (L)	2.6	4	6.3	10	16	25	39	65	102	158	177	252
Bucket Spacing t (mm)	300	300	384	384	406	522	546	648	756	756	756	882
Operating Speed (m/s)	1.05	1.05	1.04	1.04	1.17	1.17	1.32	l.37	1.52	l.52	1.52	1.52
Max. Lifting Height H (m)	50	44	50	50	50	45	50	50	50	40	35	40

The conveying capacity Q in the table is calculated at a material filling factor of 75%; the maximum lifting height H is calculated based on a material bulk density of 1 t/m3.